You can use your middle mouse button for a variety of purposes. The Middle mouse button is used primarily for scrolling, but it can also be used as a shortcut for opening a new window and quite a few other things. The middle mouse button can stop working, causing you a lot of frustration.
Your middle mouse button can be affected by a few things. A malfunctioning middle mouse button can be attributed to hardware issues, incorrect device settings, uninstalled drivers, or incorrect Windows configuration.
Check Your Mouse Hardware for Problems
If your mouse has a problem, you should first check the physical hardware.
See if your mouse works on another computer using the same version of Windows as yours. Your computer likely causes the problem if your mouse works on another computer. However, you will have to replace your mouse if your middle mouse button doesn’t work on the other computer.
You can disassemble and clean your physical mouse with a Q-tip if it seems to be a problem. You can remove dust and debris that can interfere with the mouse.
Run the Hardware Troubleshooter
There is a hardware troubleshooter built into Windows 10. You may wish to run the built-in device troubleshooter of your computer before moving on to more complicated problems.
- Type’ control panel’ into the Windows search bar and hit Enter to launch the control panel.
- Choose Hardware and Sound from the list.
- Select Devices and Printers from the list.
- You can troubleshoot your mouse by right-clicking it and selecting ‘Troubleshoot.’
- This will launch the troubleshooting tool. You will have to restart the computer after applying the fix.
Update Your Mouse’s Drivers
Update the driver of your mouse if you are still experiencing problems. It’s a little trickier than the others, but it’s what you need to do to make your mouse work properly.
- Go to the search box at the bottom. It is near the windows button.
- Type “Device Manager” to open it. A list of all your hardware and devices should appear.
- Find the mouse. Depending on what Windows version/update you are using, it will probably say “mice and other pointing devices.”.
- Find your mouse under the mice menu. It must be plugged in.
- Update the driver by right-clicking the acting-up mouse.
- It will update the driver.
- Your computer will restart once it has been updated.
Also, Read | What is a Capture Card? (And Why You Should Buy One)
Install OEM Mouse Drivers
Windows installs generic drivers when it is first installed. The generic drivers are fine for most mice, but some may not work properly. You will need to install the company-specific drivers to fix this problem. Fortunately, this is not difficult to do.
- Go to the website of the mouse manufacturer.
- Scroll down to the driver’s installation section. Each website will have different instructions. You could also search for “[manufacture] ‘s device drivers” on a search engine.
- Find the driver for your particular device. Search functions are usually available with most companies, making it easier to find your model number.
- Install the most recent drivers for your mouse.
- Reboot your computer to complete the installation. Reconfiguring your mouse button might be necessary if you had it configured differently before.
Check Out:- ADATA XPG Cruiser Super Mid Tower Review
Those Didn’t Fix the Problem—Now What?
You may have a hardware issue if your mouse continues to act up. You can replace or repair your mouse. Hopefully, one of these fixes solved your problem. You must replace your mouse if it is not working properly or repaired.